D-Link DSS-5+
Desktop 5-Port Switch

• Desktop 5-Port Switch
• Reduce Network Traffic Congestion
• Delivers high speed switching capabilities

The D-Link DSS-5+ is a powerful desktop Dual Speed 5-port 10/100Mb Ethernet/Fast Ethernet NWay auto-negotiating Switch. Designed to bring switching to the desktop, the DSS-5+ delivers high speed switching capabilities at $29.80 per port it is the lowest cost per port in the industry.

Reduce Network Traffic Congestion
It functionally eliminates unnecessary traffic and relieves data congestion by delivering dedicated bandwidth for each of the five ports. An individual port can connect to either an Ethernet or Fast Ethernet device. NWay auto-negotiation automatically determines the transmission speed of the attached device on each port.

Advanced Features
The DSS-5+ provides dynamic buffer allocation that employs network-load balancing for faster data handling. The uplink interface connection enables easy expansion. The DSS-5+ uses fast store and forward architecture to ensure low latency and high data integrity. It supports stacking though the MDI II uplink RJ-45 connection that is shared with port 1 for flexible media connection and expansion capabilities.

24-port Unmanaged Stand-alone Dual Speed Switch

D-Link DES-1024R is an unmanaged 10/100Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.

Features :
24-port 10/100Mbps Auto-sensing
The switch comes with 24 10/100Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 10Base-T and 100Base-TX, as well as between Half and Full-Duplex.

Flow Control for Secure Transmission
In the fast 200Mbps full-duplex mode, the switch's embedded flow control provides a means to protect users against possible data loss during transmission on the network. When connected to a LAN adapter (server PC) that supports flow control, the switch sends signals to the server regarding the switch's buffer overrun during peak usage periods. The server then delays transmission until the switch is ready again to accept new data.

Easy Expansion with Auto-adjustment of MDI-I/MDI-X
All 10/100Mbps ports auto-adjust MDI-I and MDI-X twisted-pair cable cross-over, eliminating the need for cross-over cables or uplink buttons. You simply plug any port to a server, a workstation or a hub, using the usual straight-through twisted-pair cable. The port will auto-sense the attached device type and adjust the TX, RX pin assignments accordingly before transmitting and receiving data.

Workgroup Plug-and-Play
With 24 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex or to hubs in half-duplex.

Power Users
With low-cost connection per-port, the switch can also be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.

Optional 100Mbps Fibre Ports
An open slot is provided on the front panel to let you install an optional Fast Ethernet fibre module. This module provides 2 100Mbps Fibre ports for 2 server connections or switch-to-switch cascading over the reliable fibre cables, which can be up to 2km long.

Feature Summary :

• 24 10/100Mbps Ports

• Auto-adjustment of MDI-I/MDI-X on every port for easy expansion

• All ports support half/full-duplex

• IEEE 802.3x Flow control, Back-Pressure in Half-Duplex for protection against data loss

• Dynamic buffer allocation for each port

• Auto-learning of network configuration

• Secure store-and-forward switching scheme

• Auto-correction of reverse twisted-pair polarity

• Rackmount Size

• DES-102F - 2-port 100Mbps Fast Ethernet Fibre Ports with SC Connectors

Technical Standards :

• IEEE 802.3 10Base-T Standard

• IEEE 802.3u 100Base-TX Standard

• ANSI/IEEE 802.3 NWay Auto-negotiation

• 100-ohm Category 3,4,5 (for 10Base-T) and Cat 5 (for 100Base-TX) Unshielded Twisted Pair cable

• EIA/TIA-568 100-ohm Shielded Twisted Pair cable

Protocols :

• IEEE 802.3 Ethernet CSMA/CD

• IEEE 802.3u Fast Ethernet CSMA/CD

• IEEE 802.3x Flow Control

Certification :

• FCC Class A

• CE Mark

• VCCI Class A

• C-Tick

• BSMI Class A

• UL

• CSA

• TUV/GS

System Feature :

• Store-and-Forward Transmission Method

• 4K MAC Address Filtering Table

• 768KB RAM Buffer per Device

• 2.6Gbps Backplane

• Internal Universal Power Supply

Performance Feature :

• 10Base-T Half-Duplex Filtering Rate = 14,880 pps per port

• 100Base-TX Half-Duplex Filtering Rate = 148,800 pps per port

• 10Base-T Half-Duplex Forwarding Rate = 14,880 pps per port

• 100Base-TX Half-Duplex Forwarding Rate = 148,800 pps per port

Operating Environment :
Dimensions :

• 441 x 207 x 44 mm

Weight :

• 2,650 grams

Operating Temperature :

• 0^oC to 50^oC

Storage Temperature :

• -30^oC to 60^oC

Humidity :

• 5% to 95% non-condensing

Power Consumption :

• 39.0 watts (max)

D-Link DES-1016R+
Rackmount Switches

• With optional fiber uplink
• 16-port switch
• Fast ethernet switch
• Unmanaged rackmount

D-Link's DES-1016R+ switch is a powerful rackmount Dual Speed 10/100Mbps Ethernet/Fast Ethernet NWay auto-negotiating Switch with an optional 100Base-FX Fiber Uplink Module (SC). Designed to bring switching to the small office and small business, this switch delivers high speed switching capabilities at a price per port under $25, which makes it the lowest cost per port in the industry.

Relieves Data Congestion
It functionally eliminates unnecessary traffic and relieves data congestion by delivering dedicated bandwidth for each of the 16 ports. An individual port can connect to either an Ethernet or Fast Ethernet device. NWay auto-negotiation automatically determines the transmission speed of the attached device on each port.

DES-1016R+   Rackmount Switch    Technical Specifications   Number of Ports • 16 (DES-1016R+)   Module • DES-102F 100Base-FX Fiber Uplink (SC)   Transmission Speed   of Ports • 10Mbps or 100Mbps NWAY auto-negotiation on all 16 ports   Connectors • Fixed ports: RJ-45 • Module ports: SC   Cable Support • 110Mbps connections support Cat. 3, 4, 5 UTP or STP cabling • 100Mbps UTP connections support Cat. 5 UTP or STP cabling • 100Mbps fiber connections support XXXXXXX cabling   Standards   Compliance • IEEE 802.3 10Base-T Ethernet • IEEE 802.3u 100Base-TX Class II Fast Ethernet repeater • IEEE 802.3X   Duplex • Half or Full per port   Protocol • CSMA/CD   Backplane Speed • 2.6Gbps (DES-1016R+)   MAC Address Table • 1K   Packet Forwarding/   Filtering Rate • 14,880 packets per second (10Mbps) • 148,800 packets per second (100Mbps)   Partitioning • Automatic for each port   Uplink Port • One 100Base-FX Fiber uplink module (SC)   LED's Per Port • Link/Rx • port speed (10/100Mbps)   LED's Per Device • Power • Collision (10/100Mbps)   Power Supply • Internal   Operating   Temperature • -10° to 55° C (14° to 131° F)   Humidity • 5% to 95% non-condensing   Classification • FCC Class A • CE Mark • VCCI Class A • CSA 950 • UL 1950 • C-Tick • TUV/GS

D-Link DES-1024R+
Rackmount Switches

• Automatically configures uplink port, a true plug and play switch
• With optional fiber uplink
• 24-port switch
• Fast ethernet switch
• Unmanaged rackmount

D-Link's DES-1024R+ switch is a powerful rackmount Dual Speed 10/100Mbps Ethernet/Fast Ethernet NWay auto-negotiating Switch with an optional 100Base-FX Fiber Uplink Module (SC). Designed to bring switching to the small office and small business, this switch delivers high speed switching capabilities at a price per port under $35, which makes the lowest cost per port in the industry.

Relieves Data Congestion
It functionally eliminates unnecessary traffic and relieves data congestion by delivering dedicated bandwidth for each of the 24 ports. An individual port can connect to either an Ethernet or Fast Ethernet device. NWay auto-negotiation automatically determines the transmission speed of the attached device on each port.

Number of Ports

• 8

• 10Mb or 100Mb NWAY auto-negotiation on all 8 ports

• All ports RJ-45

• 10Mb connections support Cat. 3, 4, 5 UTP or STP cabling
• 100Mb connections support Cat. 5 UTP or STP cabling

• IEEE 802.3 10Base-T Ethernet
• IEEE 802.3u 100Base-TX Class II Fast Ethernet repeater
• IEEE 802.3.1d

• Half or Full per port

• CSMA/CD

• Automatic for each port

• Cascading though the MDI II uplink RJ-45 connection that is shared with port 1

• Link/Rx
• auto-partition and port speed (10/100Mbps)

• Power
• Collision (10/100Mbps)

• External

• One

• -10 degrees to 55 degrees C

• 5% to 95% non-condensing

• FCC Class A
• CE Mark
• VCCI Class A
• CSA 950
• UL 1950
• C-Tick
• TUV/GS